Technical Specs:
● Size (cm): 3.5w X 10.8h X 4.5t
● Weight: 180gr.
● Input Impedance: 200K Ohms
● Output impedance:
○ Out: 1k Ohms
○ XLR: 100 Ohms
● Power Consumption: 20mA
Always use a good quality power source. Regulated 9v DC, center negative is
recommended. Avoid cheap switching or poorly filtered power supplies.
EMI and EMC emissions:
The manufacturer claims that the above product fulfills the requirements as set by EN55013,
EN55020, EN60555-2, EN60555-3, RoHS, WEEE. EMC / EMI This equipment has been tested
and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in
residential installations. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: · Reorient or relocate
the receiving antenna. · Increase the separation between the equipment and receiver. · Connect
the equipment to an outlet on a circuit different from that to which the receiver is connected. ·
Consult the dealer or an experienced radio/TV technician for help
Warranty:
All of our products have a 2 year warranty covering production defects or malfunctions. If you
have any issue with your unit, please contact your dealer or contact us at
info@dsmnoisemaker.com
To Previous Page
Loading...