DT Research DT390i User Manual

DT390i
ENGLISH
2
3
ENGLISH
Buon Funcons (with Windows XP Operang System)
BUTTON ACTION
Programmable
Programmable, launch so (on-screen) keyboard (default)
Launch SAS (Secure Aenon Sequence)
Generate Ctrl+Alt+Del keys to invoke the security windows defined under Windows XP
Programmable,
Calibrate touch screen before log on the operang system
Change display orientaon (portrait/ landscape) (default)
Programmable, system ulity menu (default)
Programmable,
As scanner trigger
when equipped with the scanner module
Power on,
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts device (soware dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
The DT390i (with Windows XP Operang System)
Baery/Power LED
Wireless LEDMicrophone
Stylus
Buon ManagementWireless Network Sengs
Calibraon
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking orange indicates that the baery is below 10%•
Blinking blue and orange alternately indicates the baery is being warmed up. Do not •
unplug the AC/DC adapter.
Precauons
Always exercise care when operang and handling the DT390i.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT390i should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power
the device, do NOT use any
•
AC-DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power off the DT390i and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the DT390i, as this will void the
warranty.
•
The DT390i internal baery is designed for wide temperature usage. Please do not use
•
it for other tablet models.
(The wide temperature design is not applicable for external baery)
Basic Features
The DT390i wireless tablet integrates a bright and responsive touch display, 1 USB port,
and embedded networking elements such as wireless LAN or oponal 3G. The primary
device is complemente
d by a suite of accessories, including baery expansion, docking
cradles, and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT390i typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT390i does not come with
such a network adapter, please consult your device provider to establish the desired
n
etwork connecvity.
1
8
9
2 3
4
5
6
8
9
7
Input/ Output Ports
Headphone Jack
USB Port
DC Power Input
Full Slot Smart Card Reader
A
C
D
B
A
B
C
D
1 2 3 4 5 6 7
Baery and Power Meter

DT Research DT390i Specifications

General

Brand	DT Research
Model	DT390i
Category	Tablet
Language	English