Need help?Do you have a question about the DT SWISS O.D.L and is the answer not in the manual?
Covers manual validity, safety instructions, target audience, and layout details.
Explains manual usage, cross-references, and types of DT Swiss manuals.
Details DT Swiss warranty terms and conditions for European customers.
Details DT Swiss warranty terms and conditions for US customers.
Covers cleaning, tools, environmental protection, and disclaimers for fork maintenance.
Describes the Negative Coil Spring technology and its performance benefits.
Explains the OPEN, DRIVE, LOCK damping system and its operational modes.
Details how compression damping operates within the O.D.L system.
Details how rebound damping operates within the O.D.L system.
Covers the process and considerations for steerer tube length adjustment.
Provides detailed steps and safety precautions for cutting carbon steerers.
Outlines the procedure for shortening aluminum steerer tubes.
Details installation of different steerer expander types and compatibility.
Provides instructions and safety warnings for installing the fork onto a bike.
Details the procedure for installing disc brakes onto the fork.
Explains how to install the front wheel and perform a collision test.
Explains how to correctly use the shock pump for pressure adjustments.
Covers recommended air pressures and how to adjust suspension sag.
Guides on adjusting rebound and compression damping for optimal performance.
Explains the APT system for adapting suspension progression via volume spacers.
Details the procedure for adding or removing volume spacers to tune the fork.
Provides steps to convert the fork from remote to manual control operation.
Provides steps to convert the fork from manual to remote control operation.
Guides on installing lightweight and Two In One remote levers onto handlebars.
Details routing and installing the control cable and housing for remote systems.
Provides general advice on cleaning and maintaining the fork for longevity.
Outlines recommended service schedules and specific actions for maintenance.
Details procedures for performing a small service, including disassembly and part replacement.
Covers bedding-in, post-crash inspection, and bushing clearance.
Addresses problems like not responding, bottoming out, and not using full travel.
Solves issues with fork rebound speed and general damping performance.
Troubleshoots problems with the lockout function not engaging or working correctly.
General| Brand | DT SWISS |
|---|---|
| Model | O.D.L |
| Category | Bicycle Accessories |
| Language | English |
To Next Page