EasyManua.ls Logo

DTE D600 - After Service; Symbol Instruction

DTE D600
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
5.3.3 This equipment should be stored in a room where the relative
humidity is 10% ~ 93%, atmospheric pressure is 70kPa to106kPa, and
the temperature is -20
°C ~
+55
°C
.
5.3.4 Please turn off the power switch and pull out the power plug
when the equipment is not used. If the machine is not used for a long
time, please make it get through to the power and water once per month
for ve minutes.
5.4 Transportation
5.4.1 Excessive impact and shake should be prevented in
transportation. Lay it carefully and lightly and don't invert it.
5.4.2 Don't put it together with dangerous goods during
transportation.
5.4.3 Avoid solarization and getting wet in rain or snow during
transportation.
5.5 Working condition
5.5.1 Environment temperature: +5
°C
to +40
°C
5.5.2 Relative humidity: 30%~75%
5.5.3 Atmosphere pressure: 70kPa to 106kPa
5.5.4 A temperature of the water at the inlet
not higher than +25
°C
6. After service
We offer one year free repair to the equipment according to the
warranty card.
The repair of the equipment should be carried out by professional
technician. We are not responsible for any irretrievable damage caused
by the not professional person.
7. Symbol instruction
Trademark
Ordinary equipment
Alternating current Drip-proof
Date of manufacture Manufacturer
Class II equipment Type BF applied part

Related product manuals