DTE Lux E - Basic Technical Specifications; Adapter Specifications; Applied Part Identification; Light Source Details

To Next Page

To Previous Page

4. Basic Technical Specications

4.1 Adapter:

a) Rechargeable Lithium battery:

Battery voltage and capacity: 3.7V, 1400mAh

Battery model: ICR18490

b) Adapter input: AC100~240V 50Hz/60Hz

Output: DC5V 1A

4.2 Applied part: Optical ber

4.3 Light source:

a) 5W high power blue light LED

b) Wave length: 420nm~480nm

c) Light intensity: 1600mW/cm² ~ 1800mW/cm²

4.4 Work condition:

Environment temperature: +5

℃

to +40

℃

Relative humidity: 30%~75%

Atmosphere pressure: 70kPa to106kPa

4.5 Size: 40×50×260mm

4.6 Net weight: 147g

4.7 Power consume: ≤8W

4.8 Protection type against electrical shock: Class

Ⅱ

4.9 Protection degree against electrical shock: Type B

4.10 Protection against harmful ingress of water or particular

matter: ordinary equipment (IPX0)

4.11 Safety in the presence of ammable anesthetic mixture with

air, oxygen or nitrous oxide: not suitable under this condition.

5. Installation and Demounting

5.1 Take o the red cap from the optical ber, then insert the metal part

into the front of main unit (make sure to screw when installing, oblique

insert should be prevented).