Need help?Do you have a question about the DTI HV-500 and is the answer not in the manual?
Lists potential risks and failures associated with the system, even with correct settings.
Provides safety guidelines for expert users of DTI tools and firmware, emphasizing careful operation.
Illustrates the AC current limit reduction based on IGBT temperature for device protection.
Shows the pinout configuration for the main harness connector (H) and lists pin functions.
Explains how to connect the inverter to a PC for parameterization using the DTI Tool software.
Crucial warning to double-check all wiring before applying power to prevent controller damage.
Provides a visual diagram illustrating the harness connector wiring for system integration.
Stresses the critical importance of reading safety guidelines before performing high voltage wiring.
Advises waiting a minimum of 6 minutes after DC voltage shutoff for safe disconnection of high-voltage connectors.
Recommends using shielded wires with proper grounding for AC side connections to minimize inductance.
Explains the necessity of electrical isolation between high and low voltage systems and the role of the isolation monitor.
General| Brand | DTI |
|---|---|
| Model | HV-500 |
| Category | Controller |
| Language | English |
To Next Page
