4
Power
Confirm that the supply-side voltage matches to the rated power supply voltage for a power
supply pack of NETIMPRESS avant.
Use the AC cable provided with NETIMPRESS avant to ensure safe operation.
Do not use damaged AC cable.
Do not remove the case
Only qualified service engineers should remove the case of NETIMPRESS avant because of the
high voltage.
Action to be taken if abnormality is found
If any failure is found, such as smoke or burnt odor, disconnect NETIMPRESS avant and the target.
And then turn off the power of main unit. Contact the support center of DTS INSIGHT Corporation.
To Next Page
Loading...