Dual 1226 - Lubrication

Cynch plug,
Cynch plug,
Audio cable
white
black
compl.
Mounting instructions
Shipping carton compl.
Stroboscope washer 50/60 Hz
Operating instructions 1226, 4 languages
Operating instructions 1226 UAP
a
Audio cable compl. with miniature plug and socket
for plat prong
Power cable Europa
compl.
Ce ee ee |
with RCA-type plugs
eee eee eee
ee
ed
eee eeee
ed
Hardware for cartridge mounting ....
Adjusting lever
** Parts not illustrated
Lubrication
All bearings and friction surfaces have
been adequately lubricated at the works.
Replenishment of oil and grease is only
necessary after about 2 years with nor-
mal use as the most important bearing
points (motor earings) are fitted with
sintered metal bushes.
Lubricants should be applied sparingly
to bearing points and friction surfaces.
It is important that no oil or grease
should. come in contact with the friction
faces of the idler wheel, motor pulley
and platter as otherwise slip will occur.
Avoid touching these parts for the same
reason.
When lubricants of different types are
mixed, chemical decomposition frequently
occurs,
To avoid complications with lubricants we
recommend using the original lubricants
listed below.
The following lubricants should be used:
Renotac No. 342 adhesive oil
BP Super Viscostatic 10 U/30
Shell Alvania No. 2
Isoflex PDP 40
Silicone oil AK 500 000
Molykote
PPPP RD
20
Alterations reserved