Dual CS 650 RC Service Manual

Lubricating instructions
All bearing and
friction points of
the unit are adequately lubricated
at the factory. Replenishment of
oil and grease is only necessary
after approx. 2 years of normal
use as the
most important bearing
points have sintered metal bushes.
The motor bearings have long-life
sintered
metal bushings 'and thus
should not be lubricated. Bearing
points and friction faces should
be lubricated
sparingly rather
than
generously. When using dif-
ferent
lubricants, chemical de-
composition can
often take
place. To prevent lubrication
failure, we recommend using the
original lubricants shown below.
Wacker silicon
oil
AK
300 000
BP super viscostatic
10 W/40
Shell
alvania No. 2
Fig,
26
Fig.
27
Dual
Gebrüder
Steidinger •
7742
St.Georgen/Schwarzwald
920 668-2 5.2/0280
Printed in Germany by Dual

Dual CS 650 RC Specifications

General

Brand	Dual
Model	CS 650 RC
Category	Turntable
Language	English