What to do if my Dualit DCM2 Coffee Maker lights are off and it's not working?
If your Dualit Coffee Maker is not working, the lights are off, and the machine ceases to operate, the fuse may have failed. Check and replace the fuse.
Why is steam venting from the drip tray of my Dualit DCM2 Coffee Maker?
Steam venting from the drip tray of your Dualit Coffee Maker is normal. Water is being purged through the machine to reduce the operating temperature, ready for the next coffee. This will automatically stop when the machine has finished purging, so there is no cause for concern.
Why is my Dualit DCM2 Coffee Maker making a loud pumping noise?
Your Dualit Coffee Maker might be making a loud and continuous pumping noise because the water tank is not correctly seated in position or the water tank is empty. Ensure the water tank is correctly seated and filled.
What to do if no coffee flows from my Dualit DCM2 Coffee Maker?
If no coffee is flowing from the brewhead of your Dualit Coffee Maker, it could be due to several reasons: the water tank might not be correctly seated, the showerhead and cup filter may be blocked, you might be tamping too hard, the coffee grind may be too fine blocking the cup filter, or there may be too much coffee in the cup filter. Make sure the water tank is correctly seated. Clean the showerhead and cup filter. Lightly tamp the coffee grounds. Ensure you are using setting 3-5 on the Dualit coffee grinder or use a pre-ground coffee suitable for espresso machines. Use the measuring spoon to ensure the correct amount of coffee.
How to fix coffee leaking from the brewhead on my Dualit Coffee Maker?
If coffee is leaking from the brewhead of your Dualit Coffee Maker, it could be due to dried coffee on the gasket, an ESE pod not seated correctly, or a blocked showerhead. Clean the gasket and showerhead. Ensure the ESE pod tab is tucked in correctly.
How to fix no steam flowing from the steam wand on Dualit Coffee Maker?
If no steam is flowing from the steam wand of your Dualit Coffee Maker, it could be because the water tank is not correctly seated or the steam wand is blocked. Ensure the water tank is correctly seated. Clean the steam wand and descale it.
Why is my coffee not hot enough from my Dualit DCM2 Coffee Maker?
If your coffee is not hot enough when using your Dualit Coffee Maker, it could be because the thermobloc has not reached the correct temperature or the filter holder is not pre-heated. Pre-heat the thermobloc and prime the machine.
Why doesn't my Dualit DCM2 Coffee Maker produce foamy milk?
If your milk is not foamy after frothing with your Dualit Coffee Maker, it could be because the milk is not cold or fresh enough, or the steam wand is blocked with milk residue. Use cold, semi-skimmed milk in a stainless steel jug for best results. Clean the steam wand and descale it.
Why does my coffee from Dualit DCM2 Coffee Maker have no crema?
If your coffee has no crema when using your Dualit Coffee Maker, the cup filter may be blocked because the coffee grind is too fine. Ensure you are using setting 3-5 on the Dualit coffee grinder or use a pre-ground coffee suitable for espresso machines. Clean the cup filter.
Diagnosing and resolving issues with no steam from the steam wand.
Identifying and fixing problems with coffee not flowing from the brewhead.
Addressing and rectifying leaks originating from the brewhead area.
Causes and solutions for unusual machine noise.
Troubleshooting steps when the machine fails to operate.
General| Model | DCM2 |
|---|---|
| Material | Stainless Steel |
| Pump Pressure | 15 bar |
| Capacity | 1.5 Litres |
| Power | 1250W |
To Next Page
