What to do if my Dualit Cino Coffee Maker is not working?
First, ensure the machine’s plug is properly connected to the socket and the socket switch is turned on. If the issue persists, check and replace the fuse. For further assistance, contact the Dualit customer helpline on 01293 652500.
Why is my Dualit Coffee Maker making a loud noise?
The machine is pumping water through the system at high pressure, which is normal during pre-heating.
Why is the drip tray filling so fast on Dualit Coffee Maker?
The drip tray filling quickly is normal operation.
How to exit Descale Mode on Dualit Cino Coffee Maker?
To exit Descale Mode, press the Descale Button for 5 seconds.
Why is there no steam coming out of my Dualit Cino?
There could be several reasons for this issue. The steam wand might be blocked with milk residue, so you should clean the steam wand and nozzle. Also, ensure that the steam valve is closed and then reopened to steam. Another reason might be that the machine requires descaling.
How to make milk foamy with Dualit Cino?
To achieve better milk frothing, use fresh, cold semi-skimmed milk. Also, ensure the steam wand is not blocked with milk residue by cleaning the steam wand and nozzle. If the milk is burning, reduce the steam flow by rotating the steam valve clockwise or steam for a shorter period.
What does the indicator light mean on Dualit Cino?
A flashing red and amber light indicates a low water level, so add at least 500ml of water to the water filter holder. If the water tank is not correctly seated, press firmly on it to secure it in place. A flashing or solid green light means the machine is warming up. A flashing or solid amber light indicates that descaling is required.
How to reduce steam speed on Dualit Cino Coffee Maker?
If the steam speed is too high, it is likely that the steam valve is fully open. To reduce the flow, turn the steam valve clockwise.
General| Brand | Dualit |
|---|---|
| Model | Cino |
| Category | Coffee Maker |
| Language | English |
Guidelines for safe electrical usage, including earthing and cord condition.
General usage guidelines to prevent injury, burns, or appliance damage.
Steps for preparing and installing the water filter before first use.
Procedure to flush the machine with steam before initial operation.
Steps for using the steam wand to heat milk to the desired temperature.
Steps to froth milk by introducing air and developing texture.
Procedure to flush and wipe the steam wand after every use.
How to clean the steam nozzle, including using a pin.
Steps for preparing the machine and descaler solution for descaling.
How to initiate the descaling mode using the descale button.
Step-by-step instructions for running the descaling solution through the machine.
To Next Page
