Do you have a question about the Ducane RHP13 and is the answer not in the manual?
Details the R410A refrigerant system, copper tubing, and service ports for optimal performance.
Highlights features like low profile, insulation, durable finish, and service access for robust build.
Describes the insulated blower compartment and high-efficiency multispeed motor for quiet operation.
Covers integrated L.E.D. diagnostics, defrost control, and pressure switches for system monitoring.
Outlines base rail system, discharge options, utility connections, and filter provisions for ease of installation.
Provides information on the 10-year limited parts and compressor warranty coverage.
Explains the configuration and meaning of each segment in the product model number.
Lists key electrical parameters including voltage, ampacity, and motor ratings for each model.
Details cooling capacity (BTUH), SEER, EER, S/T, and CFM ratings for various models.
Provides heating capacity (BTUH) and COP/HSPF ratings at different outdoor temperatures.
Presents airflow (CFM) data at various static pressures and blower speed taps.
Details heating output (Btuh and kW) under varied outdoor conditions.
Lists cooling output (Btuh, S/T, kW) across different indoor and outdoor temperature combinations.
Details electric heater models, supply voltage, kW, and circuit protection requirements.
Provides dimensions for 1" filter slots for both small and large base units.
Lists optional accessories such as electric heaters, economizers, and roof curbs with kit numbers.
Reports the sound pressure level (dBA) for each RHP13 model.
Presents the primary length, width, and height dimensions (A-F) for the unit.
Details dimensions (G-L) related to the rear and top views, including port locations.
Provides measurements (M-R) for the left and right sides, indicating panel access and entry points.
Specifies dimensions for downflow economizer dampers for 24, 30, and 36 models.
Lists dimensions for horizontal economizer dampers for 42, 48, and 60 models.
Details the dimensions for manual fresh air dampers.
Provides dimensions for motorized fresh air dampers.
Presents the dimensions (A-F) for the roof curb accessory for installation.