5-OPERATION
Before using the machine you must read the Engine instruction book.
Engine delivered without oil: add 0.6liter of oil before
starting the engine.
ENGINE STARTING:
Once the machine has been set up properly, start the engine as follow:
a) Put the lever on the START position
。
b) Take the flame out (N
○
3) and maintain it against the superior handle, pull on the
recoil starter handle until you can feel resistance and then pull harshly.
c) Put the lever on RUN position
。
Blade is in action as soon as engine started. While the machine is working
maintain the security handle (3) in working position. The engine will stop as
soon as you release the engine control bar.
To Next Page
Loading...
