EasyManua.ls Logo

Ducar 161CC - Hints for Mulch-Mowing; Starting Operation; Retrofitting for Mulching Mower; Resetting for Side-Discharge Mowing

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
2. side-discharge mower.
What is mulching?
When mulching, the grass is cut in one working step, then finely chopped and returned
to the grass Strip as natural fertilizer.
Hints for mulch-mowing:
- Regular cut-back by max.2 cm from 6 cm to 4
cm grass height
- Use a sharp cutting knife
- Do not mow wet grass
- Set max. motor speed
- Only move at walking pace
- Regularly clean mulching wedge,housing inner
Side and mowing blade.
Starting operation
Retrofitting for mulching mower
Note: Only with a stopped motor and standstill Cutter!
- Push the mulching wedge into the discharge channel. Lock the mulching wedge with
housing–the nose on the bottom side of mulching wedge grip must snap into the
opening on the housing.
-Lower the discharge flap again.
Resetting for side-discharge mowing
Note: Only when motor and cutter are at Standstill!
- Lift the discharge flap and remove the grass catch box
- Mount the mulching wedge(see mulch Mowing).
- Lift rear flap for side discharge(See below picture 3 and 4).
- Mount the discharge channel for side discharge on the support pin of the rear flap.(See
below picture 5)
- Lower the rear flapthe rear flap lies on the Discharge channel.
(See below picture 6)

Related product manuals