Ducar DFD3000H - Connection to Building Electrical System; Ground Terminal; Generator Use

-
- 14 -
GENERATOR
USE
Connections to Building Electrical System
Connections for standby power to a building electrical system must be made by a qualified electrician. The
connection must isolate the generator power from utility power, and must comply with all
applicable laws and electrical codes. A transfer switch, which isolates generator power from utility power, is
available through authorized generator dealer.
WARNING
Improper connections to a building electrical system can allow electrical current from the generator to back feed
into the utility lines. Such back feed may electrocute utility company workers or others who contact the lines
during a power outage, and the generator may explode, burn, or cause fires when utility power is restored.
Consult the utility company or a qualified electrician.
Ground Terminal