57
EN
Use and maintenance manual
– Removing the components: – Connecting the transmission
battery and inserting seatpost:*
Once you have removed the main
packaging you can start removing
the components that are delivered
disassembled from the bicycle:
saddle and seatpost (with
transmission battery inside based on
the bicycle’s specications) and the
front wheel.
–Checking the content of the box:
Check that none of the standard
components delivered with the
bicycle are missing, as well as extra
accessories supplied in a separate
box, which is normally located on the
bottom of the main box. If you have
any doubts, if there is content missing
or damaged content, do not hesitate
to contact the manufacturer.
*Skip the rst 5 points if the
purchased bicycle model includes a
transmission group that is not the
FSA K-FORCE illustrated in the picture.
Check the technical specications of
the purchased bicycle model.
1. Remove the tape from the
cables coming from the seat tube.
1. 2.
3.
5.
4.
6.
To Next Page
Loading...
