EasyManua.ls Logo

Ducati Hypermotard 950 - Suspension; Exhaust System; Available Colours

Ducati Hypermotard 950
288 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
As tyre pressure is  by ambient temperature
and altitude variations, you are advised to check and
adjust it whenever you are riding in areas where
ample variations in temperature or altitude occur.
Suspension
Front
Marzocchi fully-adjustable hydraulic fork.
Stanchion diameter:
45 mm (1.77 in).
Wheel travel:
170 mm (6.69 in).
Rear
Sachs progressive shock absorber. The shock
absorber is adjustable for rebound and spring
preload. At the  pivot point it is connected to
a die-cast aluminium single-sided swinging arm. The
whole system gives the motorcycle excellent
stability.
Suspension travel:
61.5 mm (2.42 in).
Rear wheel travel:
150 mm (5.91 in).
Exhaust system
2 into 1 into 2 exhaust system with aluminium
tailpipes, catalytic  and 2 lambda sensors.
Available colours
DUCATI RED
Ducati Anniversary red code 473.101 (PPG);
Primer (White Acriflex) code L0040652 (LECHLER);
Varnish (Acriplast Red Stoner SF) code LMC06017
(LECHLER);
Mercury Grey subframe; product type Interpon
A3000 Mineral Grey code MW/2/11375AVB (Akzo
Nobel);
Red frame; product type Powder Coat TOA-PS P
CA03- 90 RED code PU CA03-90 (TOA-PC).
Black wheel rims; including:
Primer Power Primer code P09809-C (Petere Lacke).
Top coat PEHADUR EINBRENNLACK code
VPCH03250 (Petere Lacke).
REPLICA VILLA D’ESTE
Tank cover and lower headlight trim:
Primer: White primer code DS20052 (LECHLER);
Base: Red GP19 code 0084 (PPG);
279

Table of Contents