6) LOW FUEL LIGHT (AMBER YELLOW).
Comes on when fuel is low and there is about a gallon
(4 liters) of fuel left in the tank.
7) TURN INDICATOR LIGHTS (GREEN).
Illuminates and flashes when the turn indicator is in
operation. They both come on and flash when the
Hazard function is in operation
8) “ENGINE/VEHICLE DIAGNOSIS - EOBD” LIGHT
(AMBER YELLOW).
Turns on in case of “engine” and/or “vehicle” errors
and in some cases will lock the engine.
9) LIMITER LIGHT “OVER REV”/ TRACTION
CONTROL LIGHT “DTC” (RED).
Over rev light
No limiter Off
1st threshold - no.
RPM before limiter
kicks in (*)
On - STEADY
Rev limiter (limiter en-
gaged due to overrev-
ving) (*)
On - Flashing
(*) depending on the model, each calibration of the
Engine Control Unit may have a different "setting" for
the thresholds that precede the rev limiter and the rev
limiter itself.
DTC intervention light
No intervention Off
Spark advance cut On - STEADY
Injection cut On - STEADY
Note
If the Over rev function light and the DTC
intervention light should both come on at the same
time, the instrument panel gives priority to the Over
rev function.
31
To Next Page
Loading...
