Menu 1 functions: Instantaneous fuel
consumption indicator (CONS.)
This function indicates the “instantaneous” fuel
consumption. The calculation is made considering
the quantity of fuel used and the distance traveled
during the last second.
The reading is in “mpg” (miles per gallon).
The unit of measurement can be changed through
the "Change unit of measurement (UNITS)" function.
The active calculation phase only occurs when the
engine is running and the vehicle is moving (times
when the vehicle is not moving when speed is equal
to 0 and/or when the engine is off are not considered).
Dashes “- -.-”. are shown on the display when the
calculation is not being made.
Fig 23
48
To Next Page
Loading...
