Menu 1 functions: Average Fuel
Consumption indicator (CONS. AVG)
This function indicates the “average” fuel
consumption. The calculation is made considering
the quantity of fuel used and the distance traveled
since Trip 1 was last reset. When Trip 1 is reset, the
value is reset and the first value available is displayed
10 seconds after the reset. Dashes “- -.-” are shown
on the display during the first 10 seconds when the
value is not yet available.
The reading is in “mpg” (miles per gallon).
The unit of measurement can be changed through
the "Change unit of measurement (UNITS)" function.
The active calculation phase occurs when the engine
is running and the vehicle is stopped (moments when
the vehicle is not moving and the engine is off are not
considered).
Fig 22
47
To Next Page
Loading...
