Ducati Hypermotard - Setting Menu

SETTING MENU
This menu is used to set/enable some motorcycle
functions.
To access the Setting Menu, keep button (2) pressed
for two seconds; once this menu is accessed it will
no longer be possible to scroll functions on the
Display.
Important
For safety reasons, the setting menu can only
be accessed when motorcycle speed is lower than or
equal to 12.43 mph (20 km/h). If this menu is open
and the speed of the motorcycle exceeds 12.43 mph
(20 km/h) the instrument panel automatically exits the
menu and returns to the "main" display.
The setting menu contains the following items:
-
riding mode customization (R.MODE);
- backlighting adjustment (B.LIGHT);
- lap time activation and displaying (LAP);
- PIN CODE activation and editing (PIN);
- clock setup (CLOCK);
- measurement unit setup (UNITS);
- battery voltage indicator (BATT.)
- engine RPM indicator (RPM);
- error indicator, only if one or more errors are
present (ERRORS);
- EXIT.
To quit the setting menu, use buttons (1) and (2) to
highlight the "EXIT" wording, then press button (4).
70