EasyManua.ls Logo

Ducati Hypermotard - ENGINE Set Up

Ducati Hypermotard
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tip on how to select the sensitivity level
Attention
The ABS system levels of your vehicle were
calibrated using the same tires as those originally
supplied with your motorcycle.
If tires of a different size class are used or if the tire
characteristics differ significantly from the original
ones, system operation could be affected so much
and no longer be safe. We do not recommend using
tires having a different size class from those approved
for your vehicle.
Motorbike original equipment: (front 120/70ZR17 -
rear 180/55ZR17).
-
Pirelli Diablo Supercorsa SP;
- Pirelli Diablo Rosso II;
- Pirelli Scorpion Trail.
If level 2 is selected, the ABS system will be activated
to ensure a very stable braking and a good bike
control as well as to prevent any lift-up, thus allowing
a good vehicle alignment during the whole braking
action. When shifting from level 2 to level 1, braking
power will be favored compared to max. stability
control and lift-up prevention, which is nevertheless
still active.
The choice of the correct level mainly depends on the
following parameters:
1) Tire/road grip conditions (type of tire, amount of
tire wear, road/track surface, weather conditions,
etc.).
2) Rider experience and skill.
Under poor grip conditions (see point 1) and/or for
less experienced riders, we recommend using level
2.
85

Table of Contents

Related product manuals