Light control
Low / High beam
At Key-On, the high beam and low beam lights are
only the parking lights are turned on.
When the engine is the low beam is
automatically switched on. It is possible to switch
from low to high beam and vice versa with (3),
positions (A) and (B), or flash by pressing (3) in
position (C). If engine is not turning the
key to on, it is possible to switch on the
lights or flash.
If within 60 seconds from the manual switching on of
the low or high beam the engine is not the
lights are turned
To preserve the motorcycle if when
the engine the high/low beams are on, the headlight
is automatically switched and then on again
when the engine is
Fig 114
153