Duerkopp Adler 1180i-5 - User Manual

32 pages

Save Page as PDF

To Next Page

Instructions for service

1180i - 5

Minerva Boskovice, a.s., Sokolská 60, CZ - 680 17 Boskovice

Tel.: +420-516-453434, 453433, 494111 Fax: +420-516-452165 http://www.minerva-boskovice.com

Edition: 09/2004 Printed in Czech Republic S735 000635

All manuals and user guides at all-guides.com

all-guides.com

Main Page

Table of Contents2
General Safety Instructions4
Introduction4
Head of the Sewing Machine5
Hook and Hook Box5
Angular Setting of the Hook (Timing)6
Protection of the Needle and of the Hook Point6
Setting the Regulation of the Hook Lubrication7
Replacement of the Hook7
Dismantling of the Hook Box8
Needle and Thread Mechanism8
Description8
Height Setting of the Needle Bar8
Side Setting of the Needle Bar Holder9
Setting the Needle (the Needle Bar Holder) in the Direction of Sewing9
Throat Plate10
Description10
Mounting and Removing the Throat Plate and Its Insert10
Setting the Throat Plate and Its Insert10
Thread Tensioners and Limiter11
Description11
Setting the Tension of Main and Auxiliary Tensioners11
Setting the Tensioning Mechanisms of the Main Tensioners11
Setting the Adapting Spring12
Setting the Thread Limiter12
Feeding Mechanism of the Needle Feed and of the Lower Feed Wheel13
Description13
Stitch Length Mechanism13
Setting the Upper Eccentric13
Forward and Rearward Stitch Length Distribution (Rough)13
Forward and Rearward Stitch Length Distribution (Fine)14
Setting of the Control Knob (Including the Stitch Length Limitation)14
Lower Feed Wheel15
Feeding Clutches15
Description15
Setting the Lever of the Second Step of Feeding(Angle, Position)15
Setting of the Lower Eccentric16
Setting the Engagement and Disengagement of the Clutches16
Height Setting of the Feeder17
Replacement of the Feeder17
Setting the Top Roller (Pressing Force, Height)17
Feeding Mechanism of the Top Roller18
Description18
Side Setting of the Indented Lower Pulley18
Side Setting of the Indented Upper Pulley18
Setting the Tensioning Roller19
Top Roller20
Selection of the Top Roller Diameter20
Forward, Rearward and Side Setting20
Setting the Gear Clearance and in the Mounting of the Top Roller20
Replacement of the Top Roller21
Setting the Presser Foot Lift21
Bobbin Winder22
Description22
Setting the Bobbin Winder Stop22
Safety Clutch23
Description23
Setting the Disengaging Moment23
Setting the Tensioning Roller of the Indented Belt23
V-Belt, Motor - Head24
Tensioning24
Replacing the V-Belt24
To Exchange the Driving Toothed Belt24
Lubrication25
Description25
Refilling Oil25
Multiple Oil Use25
Thread Trimming26
Description of the Trimming Mechanism26
Setting the Pickup Roller26
Setting the Cam26
Setting the Fork27
Setting the Moving Knife27
Setting the Retaining Spring of the Hook Thread28
Setting Switching of the Electromagnets28
Lifting the Top Roller by Electromagnet28
Description28
Setting the Electromagnet Pin28
Setting the Electromagnet Current29
Assembly of the Top Roller Lifting Electromagnet29
Backtacking Using Electromagnet29
Description29
Electromagnet Height Setting29
Setting the Position of Push-Buttons29
Change of the Function of Push-Buttons29
Connecting the Electric Elements on the Machine Head30
Drive, Control Panel, Position Sensor30
Maintenance (Table of Operations)31
Setting the Machine According to the Sewing Category31
Introduction31
Table of Setting the Machine According to the Sewing Category32

Duerkopp Adler 1180i-5 - User Manual

Table of Contents

Duerkopp Adler 1180i-5 Specifications

Related product manuals

Brand	Duerkopp Adler
Model	1180i-5
Category	Sewing Machine
Language	English