EasyManua.ls Logo

Duerkopp Adler 558 - User Manual

Duerkopp Adler 558
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents Page:
Preface and General Safety Notes
Part 1: Operating Instructions Cl. 558
1. Product Description
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Short Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Sub-classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.4 Sewing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.1 Device Summary Table and Function Characteristics 578 E... /... . . . 9
1.4.2 Device Summary Table and Function Characteristics 558 E ... / ... . . . 11
1.5 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.1 Removal and Placement of the Clamp Plates . . . . . . . . . . . . . . . 15
2.2 Turning On - Quick Stop - Restart . . . . . . . . . . . . . . . . . . . . . . 19
2.3 End Position of the Sewing Machine . . . . . . . . . . . . . . . . . . . . 23
2.4 Needles, Threads and Gimps . . . . . . . . . . . . . . . . . . . . . . . . 24
2.5 Threading of the Underthread (Hook Thread) . . . . . . . . . . . . . . . 27
2.6 Threading the Gimps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.7 Threading of the Upper Thread (Needle Thread) . . . . . . . . . . . . . . 37
2.8 Thread Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.9 Sewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.10 Blocking the Clamp Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.11 Buttonhole Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.12 Cutting Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
2.13 Cutting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.14 Cutting Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.15 Spreading of the Material . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.16 Stitch Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
2.17 Seam Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
2.18 Buttonhole Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2.19 Changeover to Cutting Before or After Sewing . . . . . . . . . . . . . . 67
3. Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
3.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
3.2 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
3.3 Oiling Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Other manuals for Duerkopp Adler 558

Question and Answer IconNeed help?

Do you have a question about the Duerkopp Adler 558 and is the answer not in the manual?

Summary

Product Description

Technical Specification

Lists key technical data, dimensions, and performance specs.

Operation

Turning On - Quick Stop - Restart

Procedures for starting, stopping, and resuming machine operation.

Threading of the Underthread (Hook Thread)

Step-by-step guide for threading the underthread.

Threading the Gimp

Step-by-step guide for threading the gimp.

Threading of the Upper Thread (Needle Thread)

Step-by-step guide for threading the upper thread.

Thread Tension

Instructions for adjusting thread tension for optimal stitch quality.

Sewing

Detailed procedure for operating the sewing machine.

Buttonhole length

Method for setting the desired buttonhole length.

Cutting Length

How to adjust and set the cutting length.

Cutting Pressure

How to set and check the cutting pressure.

Seam Width (Buttonhole Width)

How to set the seam and buttonhole width.

Buttonhole Form

Changing buttonhole forms using exchangeable disc cams.

Change-over to Cutting Before or After Sewing

Procedures for switching cutting modes.

Maintenance

Malfunction Remedies

Duerkopp Adler 558 Specifications

General IconGeneral
TypeIndustrial Sewing Machine
Stitch TypeLockstitch
Frequency50/60 Hz
Motor TypeServo motor
Voltage220V

Related product manuals