Need help?Do you have a question about the Duerkopp Adler 550-867 and is the answer not in the manual?
Instructions for threading the needle thread, covering ETT and mechanical tension types.
Procedure for adjusting needle thread tension mechanically.
Procedure for adjusting needle thread tension via machine software (ETT).
Guide to adjusting the thread regulator for optimal stitch formation.
Step-by-step process for winding the hook thread onto the bobbin.
Instructions for threading the hook thread into the sewing machine.
How to insert the hook bobbin, especially with residual thread monitoring.
Procedure for setting the hook thread tension correctly.
Steps for safely changing the sewing machine needle.
How to lift the sewing feet using the pedal.
Method for locking the sewing feet in their lifted position.
Adjusting the sewing-foot lift stroke via the touch screen.
Procedure for setting the sewing-foot pressure.
How to set the stitch length using the touch screen.
Explanation of functions associated with the machine arm switch keys.
Interpretation of the LED indicators on the tension plate.
Function and operation of the residual thread monitor.
How to adjust the sewing-foot stroke electro-pneumatically.
Information on connecting and switching on the UPS.
Instructions for switching on and adjusting the sewing lamp.
Procedures for accessing the tearing seam visualization system.
How to log into the system using a scanner and barcode.
Alternative method for logging into the system via the menu.
Steps for logging out of the tearing seam visualization system.
Instructions on how to properly exit the program.
Routine maintenance procedures for cleaning and checking the sewing machine.
Contact information for machine repair services.
Instructions for removing shipping securing devices before installation.
Procedures for moving the sewing unit within the factory.
How to adjust the working height of the sewing unit.
How to set the position of the operating pedal.
Steps for mounting the thread stand onto the table plate.
Procedures for fitting and connecting the touch panel PC monitor.
Important considerations regarding the rated voltage and installation site.
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Max Stitch Length | 12 mm |
| Needle System | 134-35 |
| Motor Power | 550W |
| Clearance under sewing foot | 20 mm |
| Motor | Integrated direct drive |
To Next Page
