Name: Duerkopp Adler 1183i-7
Brand: Duerkopp Adler
Rating: 5 (1 reviews)

To Next Page

Instructions for service

1183i - 7

Minerva Boskovice, a.s., Sokolská 60, CZ - 680 17 Boskovice

Tel.: +420-516-453434, 453433, 494111 Fax: +420-516-452165 http://www.minerva-boskovice.com

Edition: 09/2004 Printed in Czech Republic S735 000652

Contents2
General Safety Instructions4
Introduction4
Head of the Sewing Machine5
Hook and the Hook Box5
Description5
Height Setting of the Hook5
Angular Setting of the Hook6
Protection of the Needle and of the Hook Point6
Setting of the Bobbin Case Opener6
Setting the Regulation of the Hook Lubrication7
Replacement of the Hook7
Setting the Gear7
Needle and Thread Mechanism8
Dismantling of the Hook Box8
To Check the Handwheel Angular Adjustment8
Height Setting of the Needle Bar8
Side Setting of the Needle Bar Holder9
Setting the Needle in the Direction of Sewing9
Mounting and Removing the Throat Plate and Its Insert10
Thread Tensioner and Limiter11
Setting the Tension of the Main and Auxiliary Tensioners11
Setting the Tensioning Mechanisms of the Main Tensioners11
Setting the Adapting Spring12
Setting the Thread Limiter12
Feeding Mechanism of the Needle Feed and of the Lower Feed Wheel13
Stitch Length Mechanism13
Setting the Upper Eccentric13
Setting the Prop13
Forward and Rearward Stitch Length Distribution14
Setting the Control Knob14
Lower Feed Wheel15
Feeding Clutches15
Setting the Lever of the Second Step of Feeding15
Setting of the Lower Eccentric16
Setting the Engagement and Disengagement of the Clutches16
Setting the Top Roller17
Wheel Feeder and Its Post17
Height Setting of the Feeder17
Replacement of the Feeder17
Feeding Mechanism of the Top Roller18
Side Setting of the Intended Lower Pulley18
Side Setting of the Intended Upper Pulley18
Setting the Tensioning Roller19
Replacement the Intended Belt19
Top Roller20
Selection of the Top Roller Diameter20
Forward, Reward and Side Setting20
Setting the Gear Clearance and in the Mounting of the Top Roller20
Setting the Presser Foot Lift21
Replacement of the Top Roller21
Bobbin Winder22
Setting the Bobbin Winder Stop22
Setting the Friction Gear22
Safety Clutch23
Intended Belt Transmission23
Setting the Disengaging Moment23
Setting the Tensioning Roller of the Intended Belt23
V-Belt, Motor - Head24
Driving Toothed Belt24
Replacing the Indented Belt24
Replacing the V-Belt24
Lubrication25
Refilling Oil25
Multiple Oil Use25
Thread Trimming26
Description of the Trimming Mechanism26
Setting the Pickup Roller26
Setting the Cam26
Setting the Fork27
Setting the Moving Knife27
Setting the Fixed Knife27
Setting the Retaining Spring of the Hook Thread28
Setting the Switching of Electromagnets28
Material Trimming29
Setting of the Eccentrics29
Setting of the Stop Screw29
Setting the Knife Side Position30
Setting of the Lateral Knife Position to the Sides30
Fine Adjustment of Knife When Replacing Used Insert by a New One30
Setting of Knife When Using an Insert with Different Trimming Distance30
Lifting the Top Roller by Electromagnet31
Setting of Microswitch of Trimming Device Motor Switching-On31
Setting the Electromagnet Pin31
Setting of Knife Angle with Regard to Throat Plate Insert31
Backtacking Using Electromagnet32
Setting the Electromagnet Current32
Assembly of the Top Roller Lifting Electromagnet32
Electromagnet Height Setting32
Connecting the Electric Elements on the Machine Head33
Drive, Control Panel, Position Sensor33
Maintenance34
Setting the Machine According to the Sewing Category34
Table of Setting the Machine According to the Sewing Category35

Duerkopp Adler 1183i-7 User Manual

Table of Contents

Other manuals for Duerkopp Adler 1183i-7

Questions and Answers:

Duerkopp Adler 1183i-7 Specifications

Related product manuals

Brand	Duerkopp Adler
Model	1183i-7
Category	Sewing Machine
Language	English