Duerkopp Adler 467 - Service Manual

467
Spe zial näh ma schi ne
Ser vi ce an lei tung
Ser vi ce in struc tions
Post fach 17 03 51, D-33703 Bie le feld • Pots da mer Stra ße 190, D-33719 Bie le feld
Te le fon +49 (0) 521 / 9 25-00 • Te le fax +49 (0) 521 / 9 25 24 35 • www.du er kopp-ad ler.com
Aus ga be/Edi ti on: 03/1984 Tei le-Nr./Part-No.: 0791 467651
D
GB

Summary

General Safety Instructions

Technical Data

1.1 Class 467 - with subclasses

Table listing technical parameters for various subclasses of the 467 model.

Sewing Machine

3.4 Hook and needle bar height

Setting the correct vertical relationship between the hook and needle bar.

3.6 Feeding foot and presser foot

Adjustments for the feeding foot and presser foot stroke.

3.9 Safety clutch

Adjusting the safety clutch for overload protection.

3.10 Oil lubrication

Lubrication system details for the sewing head and hook.

G-Version, Additional Equipment, and AE-Version

5.1 G-version in alternating machines (467 FA-373 G)

5.2 Needle positioning (NP)

5.3 Automatic instant foot stroke adjustment (HP-13-2)

5.4 Automatic instant foot stroke adjustment (HP-13-3)

5.5 Automatic seam bartacking (RAP)

Adjusting and operating the automatic seam bartacking function.

5.6 Edge trimming device with mobile binder (AE)

Operation and adjustments for the edge trimming and binding device.

Speed Regulation

6.1 Speed regulation of the Quick Motor NDK 880 with control box Nr. AQ: 5.607, 5.807

Speed adjustment for NDK 880 motor with specific control box.

6.2 Speed adjustment of the Efka Motors with control box No. 4 P 34 and 4 P 35

Speed adjustment for Efka motors with specific control boxes.

Duerkopp Adler 467 Specifications

General

Type	Industrial Sewing Machine
Stitch Type	Lockstitch
Needle System	134-35
Hook	Vertical Hook
Foot Lift	Manual
Power Requirements	50/60 Hz
Max Stitch Length	6.0 mm