To Next PageTo Next Page
Need help?Do you have a question about the Duerkopp Adler 281 and is the answer not in the manual?
Details the D uevoRKOPP ADLER 281 as a universal sewing machine.
Specifies the intended use and material types for the Class 281 sewing machine.
Lists available subclasses and optional accessories for the 281 sewing machine.
Provides noise emission data and detailed technical specifications for the machine.
Step-by-step guide on how to thread the needle correctly.
Instructions for adjusting needle thread tension (pretension and main tension).
Explains how the main tension is automatically loosened during thread trimming.
Procedure for winding thread onto the bobbin.
Details how to adjust the amount of thread wound onto the bobbin.
Step-by-step guide for inserting a full bobbin into the bobbin case.
Instructions for setting the correct hook thread tension for proper stitch interlacing.
Guide on how to safely change the sewing machine needle, including alignment.
Explains how to adjust the thread regulator for optimal stitch formation.
How to set stitch length for forward and reverse sewing using the setting wheel.
Guide on how to adjust the sewing foot pressure using the dial.
Describes how to lift the sewing foot using the knee lever.
Instructions on how to lock the sewing foot in the lifted position.
Explains the function of the push button on the machine arm depending on panel settings.
Details the functions of each key on the DAC basic/classic operating panel.
Prerequisites and initial setup for sewing operations.
Steps for correctly positioning the material before starting a seam.
Procedure for sewing operations once the seam has begun.
Instructions on how to interrupt and resume the sewing process.
Instructions for cleaning the machine head and direct drive components.
Guide on lubricating the hook using DA 10 oil.
Instructions for lubricating the gearbox using DA 32 oil.
Details the dimensions and construction of the table top.
Instructions for assembling the frame and stand components.
Steps for mounting the table plate onto the stand assembly.
Guide on adjusting the working height of the sewing table.
Specifies the available sewing drive (DAC classic incl. OP 1000).
Instructions for mounting the control unit onto the table.
Guide on attaching and adjusting the sewing machine pedal.
Steps for placing the sewing machine head into the table opening.
Instructions for securing the machine head with a locking strap.
Details on attaching the knee lever for mechanical sewing foot lifting.
Instructions for placing the oil can into the oil tray.
Steps for mounting the operating panel onto the machine arm.
Explains how to connect the earthing cables for static charge dissipation.
Guide on connecting various cables and plugs to the control unit.
General safety precautions for electrical work on the machine.
Procedure to verify mains voltage matches the machine's requirements.
Steps for connecting the power cables from the main switch to the sewing drive.
Guide on setting the needle positioning using the control panel.
Details parameters and settings for the thread clamp function.
General| Type | Industrial Sewing Machine |
|---|---|
| Machine Weight | Approx. 35 kg |
| Power Requirements | 220-240V, 50/60Hz |
| Needle System | 134 |
| Motor | Servo Motor |
| Presser Foot Lift | 12 mm by knee |
| Stitch Type | Single Needle Lockstitch |
