5
60mm
53mm
40mm
Detachable
Part
35mm
4
How To Use The Watch Cuff
Step 1:Remove the cuff from the winder drum by pulling on the two tabs.
Step 2: Close the strap or bracelet of your watch.
Step 3: Compress the cuff, and slide your watch over the cuff, watch dial
facing outward.
NOTES:
If your watch strap is too short, you can push out the detachable parts at the
bottom, and then follow the steps to put the watch inside. Push the cuff into
the drum until it locks into place, an audible click will be heard.
1. Manual Control TPD Selection Knob design is suitable for the model
DK018SK, DK028SK, DK038SK and DK048SK
5
Controls
DK018SK DK028SK DK038SK DK048SK
To Next Page
Loading...