8
6
Program Setting
6.1 Winding Program for Manual Control Watch Winder
6.2 Winding Program for LCD Remote Control Watch Winder
(Suitable for the model DK018SK, DK028SK, DK038SK and DK048SK)
(Suitable for the model DK068SK, DK098SK, DK128SK)
Mode 1: Rotate 2 minutes clockwise, rest for 6 minutes, cycle repeat
Mode 2: Rotate 2 minutes counter clockwise, rest for 6 minutes, cycle
repeat
Mode 3: Rotate 2 minutes clockwise, rest for 6 minutes, Rotate 2 minutes
counter clock-wise,rest for 6 minutes, cycle repeat
Mode 4: Rotate 5 minutes clockwise, rotate 5 minutes counter -clockwise,
repeat above for 3 hours, rest for 9 hours, cycle repeat.
TPD
650
750
850
1000
1950
No.of Cycle
10
10
10
10
10
Working Time for
10 Cycles( Seconds)
60
60
60
60
60
Stop Time
(Seconds)
467
395
345
250
175
Cycle Period
527
455
405
310
235
For LCD Remote Control Watch Winder
Default working modes: 24 Hours, working for total 12 hours and rest for total 12 hours
Note:
There is no magic number of rotations that will wind your watch. Things such
as how active you are, how many complications your watch has, how
frequently you use the chronograph function, how frequently you wear your
watch, the watch make, how long it has been since it was last serviced and
a host of other variables will impact what your watch requires to stay wound.
And a watch winder won't wind a watch that is fully stopped. So, you need to
manually wind the timepiece to get it running first. You will have to make this
determination by trying the various settings.
To Next Page
Loading...