PARAMETER GUIDE
95M-200 GAS-FIRED DIRECT VENT
MODULATING HOT WATER BOILER
P/N 240006105, Rev. 1.0 [04/06]
! !
! !
WARNING
Revise boiler control parameters
only if you
fully understand the purpose and result of
the changes. Tampering with the control
settings in this manual will void the warranty
and can result in unreliable operation, with
possible severe personal injury, death, or
substantial property damage.
WARNING
This document must only be used by
a qualified heating installer or service
technician. Read
all instructions, including
the Installation Manual (P/N# 240006103), the
Control Manual and Operating Instructions
(P/N# 240006104), the User’s Information
Manual (P/N# 240006106), and this Parameter
Guide before attempting to program the
control, and be sure to perform all steps in
the order specified. Failure to comply could
result in severe personal injury, death, or
substantial property damage.
IMPORTANT: Installation must comply with local
requirements and with the National Fuel Gas
Code, ANSI Z223.1 for U.S. installations or CSA
B149.1 or B149.2 for Canadian installations.
DO NOT DESTROY THESE INSTRUCTIONS!!
Please read carefully and keep in a safe place
for future reference.
To Next Page
