19
ENGLISH
DUOTONE SLICK 23 / SLICK 23 MANUAL
BLADDER REPAIR
8. BLADDER REPAIR
8.1. REMOVING THE LEADING EDGE BLADDER
1. Lay the foil wing down flat on the ground with the struts facing upwards and deflate all the struts.
2. Remove all rubber hose from the leading edge valves.
3. Open the end of the leading edge at the wing tips and pull out the bladder a few centimetres.
4. Attach a kite line to it using a larks head.
4. Open the zipper at the centre of the leading edge.
5. Push the bladder valve in the leading edge cavity.
6. Unscrew the secure ring from the
Air Port Valve II using the provided tool.
To Next Page
Loading...
