23
ENGLISH
DUOTONE SLICK 23 / SLICK 23 MANUAL
11. Ensure that the flying line you attached at the front of the strut can slide through the strut hole easily.
12. Pull out the entire bladder through the strut end.
13. Remove the flying line from the bladder, ensuring that you keep the flying line inside the strut in
order to be able to replace the bladder again.
14. To reinstall please follow the above steps backwards.
8.3. BLADDER REPAIR
For repairing small holes we recommend using the repair kit from DUOTONE.
1. Inflate the bladder and wipe it with a sponge soaked in soapy water or submerge portions of the
bladder in a tub of water. Air bubbles indicate holes.
2. Mark the hole and deflate the bladder.
3. Dry the bladder around the hole.
4. For small holes use the self-adhesive repair patches.
BLADDER REPAIR
To Next Page
Loading...
