24
DUOTONE SLICK 23 / SLICK 23 MANUAL
BLADDER REPAIR
5. For bigger holes: cut a round patch out of the enclosed tube material.
6. Spread the patch and the damaged area with a thin layer of contact glue and let both sides begin
to dry.
7. Now press both sides together.
8.4. REINSERTING LEADING EDGE BLADDER
1. Before you begin to reinsert the bladder make sure the air valves are aiming in the direction of
the valve opening.
2. Fold the bladder according the picture and lay the folded bladder in front of the zipper of the lea-
ding edge.
To Next Page
Loading...
