Need help?Do you have a question about the Duplex Jeti DS-12 and is the answer not in the manual?
Introduction to the DS-12 transmitter, its design goals, and key features.
Detailed description of the DS-12's features including display, gimbals, and connectivity.
Lists all items included in the DS-12 transmitter package.
Overview of the technical specifications and parameters of the DS-12.
Detailed identification of all controls and components of the DS-12 transmitter.
Diagram and list identifying all external controls and connectors on the DS-12.
Identification of internal components and assemblies within the DS-12 transmitter.
Instructions for adjusting stick length, angle, and tension for optimal feel.
Information on swapping and assigning switches for custom configurations.
Procedures for powering the transmitter on, off, and restarting it.
Guide to the initial power-on process and understanding the main display.
Explanation of how to navigate through the transmitter's menus and options.
Managing models, including selection, creation, copying, and deletion.
How to select, manage, and view stored models on the transmitter.
Step-by-step guide to creating a new model profile for your aircraft.
Setting up basic parameters for airplane models, including wing and tail types.
Setting up basic parameters for helicopter models, including swash plate and gyro.
Setting up basic parameters for general model types not covered by specific categories.
Assigning transmitter output functions to specific receiver channels.
Adjusting servo neutral positions, throws, and reversing.
Accessing advanced functions to fine-tune model performance.
Setting up and managing multiple flight modes for optimized control.
Adjusting control sensitivity and response curves for precision flying.
Defining custom servo response curves for specific functions.
Creating custom mixes to combine control inputs for advanced functionality.
Accessing special features and advanced programming options.
Creating conditional logic for controlling functions based on multiple inputs.
Assigning audio files to specific events or conditions for auditory feedback.
Configuring voice commands for hands-free control of transmitter functions.
General| Frequency | 2.4 GHz |
|---|---|
| Channels | 12 |
| Battery | LiPo |
| Battery Capacity | 2000 mAh |
| Display | Color LCD |
| Telemetry | Yes |
To Next Page