computer radio control system
EN
4. 4.
„Tx Battery“ - Transmitter Battery Status
"Antenna" - Information about the signal strength of each
antenna. The percentage success of bidirectional communication,
which is in the range of 0-100%, is shown in the box as well.
• Charge/Discharge current rate
• Actual Tx battery voltage
• Consumed capacity of Tx battery This value increases when the
transmitter is in use and decreases when the battery is charging.
„User Name“ - User name.
„JETIbox“ - JETIBOX emulation screen
„Timer“ - Timer
Press the ESC button to see and
operate standard JETIbox controls.
The JETIbox emulator can also
show data from both Tx modules
and receivers. You can set a specific
JETIbox window by selecting one of
JB 1 or JB 2.
111
To Next Page
Loading...