Duplomatic 10 Series - Page 2

2 M.I.6458-16-0110
GENERAL RULES
• The tool turrets of Duplomatic design are provided for being incorporated in
numerically controlled turning machines, and they must be used only for this
purpose.
The maximum performances of the turret are shown on the respective technical
data sheets.
Any improper use or alteration of the turret relieves Duplomatic of any responsi-
bility for possible injury to persons and damage to property and will also invalid
any obligation for warranty.
• Allnecessarystepsforthesafetyofthemachineoperatorhavetobemadeby
the machine builder who incorporates the turret in the tool machine as prescribed
by the European Machine Directive CE 89/392.
• Beforeinstallingandcommisioningtheturret,thetechnicianandtheoperator
must have read carefully this Instructions Manual.
• Forliftingtheturretuseonlyhoistingmeanswhicharesuitablefortheturret
weight.
• Commissioning,adjustmentandrepairoftheturretmustbecarriedoutby
skilledandauthorizedpersonnelwhomustfollowtheinstructionsinthis
Manualforallnecessarysteps.
• Beforeanymaintenanceorrepairjobandbeforeremovinganysafeguard
makesurethatthemachine'selectricmainsswitchison"OFF"position.
 Itisabsolutelyforbiddentocarryoutanyrepairormaintenancejob,when
theturretisrunning.
• Duplomaticdeclinesanyresponsibilityforanyaccidentorinjuriestopersonsor
damages to property due to non observance of the respective safety rules and
to the instructions shown in this Manual.
• Theturretanditssafetydeviceshavebeendesignedandbuiltaccordingtothe
following standards: "Machine Directives CE 89/392; 91/368; 93/44; 93/68; 73/23;
European standards EN 292/1-2; EN 60204-1.
• Warranty is invalidated also if:
— Non-original spare parts are being used.
— Functional modications are carried out on the turret without manufacturer's
permission.
This symbol is used to point out operating cycles that are important as
far as safety is concerned.
Improper handling during these cycles can cause serious injuries to
ngers, hands or other parts of the body and can cause also damages
to the turret itself or its accessories.
This symbol points out possible danger due to electricity.
Safetysymbolsusedinthismanual: