Duplomatic DDC1-12-H Series User Manual

DUPLOMATIC E.M.6427 RELEASE 7.1 05-03
6427071-230-en 1
SM-TURRETS
CONTROL UNIT DDC1-12-H**/22
CONTROL UNIT DDC1-30/12-H**/20
Software: SFW062G002, SFW062G003, SFW062G006, SFW062G012, SFW062I238
SFW062I239, SFW062I229, SFW062I245, SFW062I003
INSTALLATION MANUAL
INSTRUCTIONS FOR ELECTRICAL CONNECTIONS OF INTEGRATED CONTROL UNIT
Correspondence between electronic unit code and software
Electronic unit Code Software Turret Notes
DDC1-30/12-K20/22 0496053K20 SFW062F002
SFW062G002
SFW062I002
SMA-*-25/2*-*-230 Std. 8/12 positions
DDC1-30/12-K**/22 0496053K** SFW062I244 SMA-*-25/2*-*-230 8/12 positions high inertia
DDC1-30/12-K20/22 0496053K20 SFW062G012
SFW062I012
SMA-*-25/2*-*-230 6 and 12 positions
DDC1-30/12-K**/22 0496053K** SFW062I239 SMA-*-25/2*-*-230 12 and 24 positions
DDC1-12-H20/22 0496006H20 SFW062G003 SMA-*-20/2*-*-230 Std. 8/12 positions
DDC1-12-H20/20 0496006H20 SFW062I003 SMA-*-20/2*-*-230 8 and 12 positions (Compatible with
SFW062E003)
DDC1-12-H20/22 0496006H20 SFW062I003 SMA-*-20/2*-*-230 8 and 12 positions (Compatible with
SFW062E003)
DDC1-12-H20/22 0496006H20 SFW062G006
SFW062I006
SMA-*-20/2*-*-230 6 and 12 positions
DDC1-12-H**/22 0496006H** SFW062I238 SMA-*-20/2*-*-230 12 and 24 positions
DDC1-12-H16/22 0496006H16 SFW062G003 SMA-*-16/2*-*-230 Std. 8/12 positions
DDC1-12-H16/22 0496006H16 SFW062I003 SMA-*-16/2*-*-230 8 and 12 positions (Compatible with
SFW062E003)
DDC1-12-H16/20 0496006H16 SFW062I003 SMA-*-16/2*-*-230 8 and 12 positions (Compatible with
SFW062E003)
DDC1-12-H16/22 0496006H16 SFW062G006
SFW062I006
SMA-*-16/2*-*-230 6 and 12 positions
DDC1-12-H**/22 0496006H** SFW062I245 SMA-*-16/2*-*-230 8 and 16 positions
Notes: Software release ‘E’,’F’, and ‘G’ will be replaced by software release ‘I’.

Duplomatic DDC1-12-H Series Specifications

General

Brand	Duplomatic
Model	DDC1-12-H Series
Category	Control Unit
Language	English

Summary

General Information

Control Unit Overview

General information, safety notes, and EMC compliance for the control unit.

Technical Specifications

Detailed technical characteristics of the control unit, including power supply and I/O.

Electrical Connections

Power Supply and Wiring

Details on power supply requirements, I/O signals, and wiring considerations.

Terminal Layout

Layout and identification of connection box terminals for the control unit.

Interfacing to CNC

Operating Functions

Overview and selection of various operating functions and their input signal settings.

Zero Search and Positioning

Procedure for executing the zero search cycle and automatic positioning.

Diagnostic

Alarms and Warnings

Explanation of alarm codes, their meaning, and reset procedures.

Extended Alarm Description

Detailed descriptions of alarm codes and their troubleshooting.