Need help?Do you have a question about the Duplomatic 10 Series and is the answer not in the manual?
General| Brand | Duplomatic |
|---|---|
| Model | 10 Series |
| Category | Recording Equipment |
| Language | English |
Details for turret identification printed on the name plate.
Breakdown of the turret model designation and options.
Key technical specifications including tool stations, inertia, and timing.
Maximum forces and torques the turret can handle.
Graphical representation of tangential and tilting force capabilities.
Detailed dimensional drawings and specifications for the turret.
Specifications for the tool disc mounting interface.
Details on the direct motor drive unit, including dimensions.
Procedures for safely unpacking and lifting the turret.
Instructions for correctly mounting the turret onto the machine.
Steps for attaching the tool disc to the turret.
Details on setting up and using the coolant system.
Guidelines for connecting the hydraulic power supply.
Electrical connection diagrams and component identification.
Detailed assembly drawing and parts list for the main turret body.
Assembly drawing and parts list for the back view of the turret.
Hydraulic connection details shown from the "E" view.
Diagram and parts list for the turret's coolant circuit.
Information on lubricant type, amount, and manufacturer.
Procedure for checking the turret's lubrication status.
Maintenance check for the coolant valve.
Steps for replacing and adjusting the proximity switch.
Specifics on replacing the turret clamping proximity switch.
To Next Page