Dupray Neat User Manual

10
USE THE FOOR TOOL WITH A MICROFIBER PAD
OR A MICROFIBER CLOTH
THE FLOOR TOOL AND PAD ARE PERFECT FOR:
AVOID USING ON:

sealed hardwood

sealed laminate

glazed ceramic

marble

tile

stained concrete

linoleum

granite

vinyl

unsealed hardwood

unglazed ceramic
Lay one microfiber pad
13
on a flat surface, with fastener strips facing upward.
Align the floor tool
14
with the pad. Make sure the floor tool is oriented with the
pad, and centered as best as possible.
Press the tool firmly down onto the pad. Fastener strips will adhere
to pad grips on the underside of the tool.
Fold the microfiber cloth
19
on a flat surface.
Place the floor tool
14
centered on the cloth and attach the cloth
to the tool with the clips on each side.

Dupray Neat Specifications

General

Heating Time	7 minutes
Steam Temperature	275°F (135°C)
Power	1500 W
Steam Time	up to 50 minutes
Tank Capacity	1.5 liters
Steam Pressure	50 PSI (3.5 bar)
Cord Length	16 ft (5 m)
Accessories	floor tool