Dupray Neat User Manual

7
EN
HOW TO USE YOUR
NEAT™ STEAM CLEANER
Once filled with water, connect the
electrical cord
8
to your power supply
then press the power button
1
on the
front of your Neat™.
The status indicator
2
will light up.
Indicates the boiler is generating steam.
The Neat™ needs approximately 8 minutes
to generate the initial optimal amount
of steam.
Indicates that the Neat™ is at its
maximum steam capacity.
ORANGE
LIGHT
GREEN
LIGHT
During use, the indicator
2
will switch
between green and orange since the boiler
generates steam as you use it.
GREEN ORANGE

Dupray Neat Specifications

General

Heating Time	7 minutes
Steam Temperature	275°F (135°C)
Power	1500 W
Steam Time	up to 50 minutes
Tank Capacity	1.5 liters
Steam Pressure	50 PSI (3.5 bar)
Cord Length	16 ft (5 m)
Accessories	floor tool