Dura Trel Greenfield 11203 User Manual

Model#
11203
Assembly Instructions
Part # Description
1 2" sq. x 48¼" Back Left Post
2 2" sq. x 48¼" Back Right Post
3 2" sq. x 38" Front Post
4 1½ x 4 x 46½" Table Support
5 1½ x 4 x 46½" Shelf Support
6 1½ x 4 x 20¼" Side Rail
7 ⅞ x 3 x 20¼" PtB Rail
8 ⅞ x 3 x 46½" Back Rail
9 1½ x 5½ x 46½" Back Rail
10 1½ x 5½ x 42½" Shelf Rail
11 10¾" Shelf Support Bracket
12 1½ x 5½ x 43" Table Top Rail
13 ⅞ x 1½ x 16½" Table Brace
14 16½" Table Top End Cap
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
15 5½" Shelf End Cap
IMPORTANT: Check boxes for Contents Listed
16 Hardware Bag
(includes:)
Check inside of parts as some parts are packaged
2" sq." Post Cap
inside of others
1¼" Painted Screw
¾" Painted Screw
In the event of missing, damaged or defective parts
Super Glue Tube
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
…
Battery or Electric Drill with #2 phillips bit
… File
…
Hammer or Rubber Mallet (recommended)
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
www.dura-trel.com
sales@dura-trel.com
Tools Required
1-877-258-6020
1
3
General Information
2
1
2
2
1
1
4
14
2
2
1
2
Qty
1
Greenfield Potting Bench
2
1
4
12
48
1

Dura Trel Greenfield 11203 Specifications

General

Brand	Dura Trel
Model	Greenfield 11203
Category	Outdoor Furnishing
Language	English

Summary

General Information

Pre-Assembly Preparation

Read instructions, check contents, inspect parts, and prepare assembly area.

Customer Support Information

Contact customer service for assistance with missing, damaged, or defective parts.

Tools Required for Assembly

Power Tools

A battery or electric drill with a #2 Phillips bit is required.

Hand Tools

A file and a hammer or rubber mallet are recommended.

Warranty Information

20 Year Guarantee

Dura-Trel, Inc. products are warranted against manufacturing defects for 20 years.

Conditions Not Covered

Warranty excludes physical abuse, misuse, improper installation, and environmental damage.

Claims and Remedies

Defective items will be replaced F.O.B. from the point of manufacture.

Assembly Steps

Step 1: Back Panel Assembly

Assemble back posts with back rails, table, and shelf supports.

Step 2: Secure Back Panel

Secure the assembled back panel using screws.

Step 3: Front Panel Supports

Attach table and shelf supports to front posts.

Step 4: Secure Front Panel

Secure the assembled front panel using screws.

Assembly Continued

Step 5: Add Side Rails and Shelves

Insert shelf rails, table rails, and side rails into the front panel.

Step 6: Secure Potting Bench

Secure the entire potting bench structure with screws.

Step 7: Attach Table Top

Assemble table top rails, braces, and end caps.

Final Assembly Steps

Step 8: Shelf Rail and Brackets

Attach shelf support brackets to the shelf rail and add end caps.

Step 9: Install Shelf

Slide shelf into the back panel and secure brackets.

Step 10: Install Post Caps

Apply glue to post caps and place on top of posts.