Symptom Remedy
No sound from your TV or
speakers.
There is no function or less
_ function when you adjustthe
•_ color or the brightness of
the LCD screen using the
c
SCREEN ON/OFF and the
t_ left or right direction buttons.
The REMOTE CONTROL
unit does not work.
No rapid advance or
rapid reverse play.
Cabinet vibrates or hums.
A specific disc does not
play.
The player's controls
don't work or the player
cannot work properly.
1. Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple
language, please select AC-3 output or reset to the main
language (refer to page 11).
2. Adjust the DVD player's volume.
3. Make sure the AUDIO output connection and setting are
correct. See details on pages 17,18 and 22.
4. Ensure that the equipment is connected properly.
5. Ensure that the input setting for the TV and stereo system
are correct.
6. Adjust the volume setting on your TV's remote.
7. Make sure the headphones are detached from the DVD player.
8. The movie is paused, press play.
9. The movie is in search or fast play or other speed related play.
Audio is heard only during normal play.
The disc you used is a copied one, please replace it with a
fresh original disc.
1. Check that the remote's batteries are installed correctly.
2. The remote's batteries are weak or depleted, replace them
with new ones (refer to page 8).
3. Use the remote control at a distance of less than 20 feet
(6m) from the DVD player.
4. Remove any obstacles between the remote control and
remote control sensor, also make sure the lens on the
remote control is not dirty.
Some discs may have sections which prohibit rapid advance
(or rapid reverse), especially on opening screens or during FBI
warnings.
This is normal for high speed reading of DVD discs.
1.The disc may be dirty, try cleaning the disc.
2. Make sure the disc is not upside down.
3. The region code is not 1, the disc cannot be used.
4. Disc may not be industry standard or it may be an illegal
copy. Only use legally sold movies not pirated copies.
Set needs to be reset.
Reset the DVD player by removing the battery pack and
disconnecting the AC adaptor for 1 minute. Replace the battery
pack and AC adaptor to resume normal use. (The player may
not be operating properly due to lightning, static electricity,
damaged or wrong discs, or some other external factors).
-25 IB-PDV709-WM-E-061006
To Next Page
Loading...