EasyManua.ls Logo

Duracell Powerpack 300 - Connecting to an External Battery

Duracell Powerpack 300
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
5. Turn the compressor off before removing nozzle
adaptor from valve stem.
6. Remove nozzle adaptor from valve connector and store
in storage compartments.
Note: Leave the thumb latch in the open position for
storing to relieve pressure on the internal mechanisms.
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after
each 10 minutes of continuous operation.
Connecting to an External Battery
You can extend battery operating times by connecting
the Duracell
®
Powerpack to a larger external battery.
For example, an external 60 Ah battery gives
approximately ve times the operating time of the Duracell
®
Powerpack internal 12 Ah battery.
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps to
touch each other or another common metal conductor. This
could cause damage to the unit and/or create a sparking/
explosion hazard.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive to
positive (red clamp to battery “+”) and negative to negative

Table of Contents

Related product manuals