DURACLASS 1715 - Caution Decal Index

4
HOIST
MODEL
BODY
LENGTH
MOUNTING
HEIGHT
CAPACITY
BODY
& PAYLOAD
ft. m. in. mm
tons
U.S. Metric
1715 DA 8 2.438 13-3/8 340 12.0 10.9
9 2.743 14-3/8 365 10.5 9.5
10 3.048 14-3/8 365 9.0 8.2
1721 DA 9 2.743 14-3/8 365 13.5 12.2
10 3.048 14-3/8 365 12.0 10.9
1821 DA 9 2.743 15-3/8 390 17.0 15.4
10 3.048 15-3/8 390 15.0 13.6
11 3.353 15-3/8 390 13.0 11.8
1824 DA-
HD
10 3.048 16-3/8 416 21.0 19.0
11 3.353 16-3/8 416 19.0 17.2
12 3.658 16-3/8 416 17.0 15.4
13 3.962 16-3/8 416 15.0 13.6
14 4.267 16-3/8 416 14.0 12.7
*Above capacities based on mounting body with 12 in. (305 mm) overhang from
hinge to end of body. Also assumes level loading, with center of gravity at mid-
point of body.
CAUTION DECAL INDEX
The following illustration shows the location of all caution and warning
decals. Following the illustration you will nd a listing of the cautions
contained on the decals. Familiarize yourself with all of the operating cau-
tions before you operate the hoist.
All decals must be kept clean and complete. Replace any decals which
are unreadable. Decals may be procured from your authorized DuraClass
Distributor.