11
OPERATING INSTRUCTIONS
POWER TAKE-OFF OPERATION WITH MANUAL TRANSMISSION
Disengage PTO when hoist is not in use or when traveling on the
highway.
Figure 6. Standard Hoist Controls
To Engage Power Take-Off (PTO)
1. Place transmission shift lever in NEUTRAL.
2. Set hand brake.
3. Depress clutch pedal.
4. Shift PTO into gear.
5. Release clutch pedal.
Equipment is now ready to operate.
To Disengage PTO
1. Depress clutch pedal.
2. Shift PTO out of gear.
3. Release clutch pedal.
Truck is now ready to move.
To Next Page
Loading...