EasyManua.ls Logo

Duraflame DFS-750-6 - User Manual

Duraflame DFS-750-6
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
CONSUMER SAFETY INFORMATION
PLEASE READ THIS MANUAL BEFORE INSTALLING
AND OPERATING THIS APPLIANCE
WARNING!!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
E L E C T R I C S T O V E W I T H H E A T E R
HOMEOWNERS OPERATING MANUAL
MODELS: DFS-750-1, DFS-750-6
V E N T F R E E D E C O R A T I V E E L E C T R I C S T O V E
Thank you and congratulations on your purchase of a Twin-Star International, Inc.
stove. Please read the Installation & Operating Instructions before using this
appliance.
IMPORTANT: Read all instructions and warnings carefully before starting installation.
Failure to follow these instructions may result in a possible electric shock, fire hazard
and/or injury and will void the warranty.
Installation of Electric Fireplace, should take 15 minutes. The only tool required is a
Phillips head screwdriver, not supplied with this unit.
E-mail: parts@twinstarhome.com
In English Call: 800-318-9373
In French Call: 800-318-9374
In Spanish Call: 800-318-9373
For Customer Service:
WARNING: THIS IS AN UNVENTED,
ELECTRIC APPLIANCE. DO NOT
ATTEMPT TO BURN WOOD OR
MANUFACTURED FIRELOGS IN OR
ON THIS APPLIANCE OR GRATE.
Distributed by
Twin-Star International, Inc. Under license.
duraame
TM
and the duraame ame
logo are trademarks of Duraame, Inc.
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China • Printed in China
Made in China
Printed in China
Meijer.com

Other manuals for Duraflame DFS-750-6

Questions and Answers

  • C
    Candice BrockAug 7, 2025
    What to do if Duraflame Stove heater doesn’t work?
    • K
      Kimberly MillerAug 7, 2025
      If the Duraflame Stove heater isn’t working even with the power and heater switches on and the thermostat at its highest setting, it's possible the thermal protector has tripped. To resolve this, turn all switches off and unplug the unit for 5 minutes. After 5 minutes, plug it back in and operate as usual. Alternatively, the heater function may be locked. To unlock it, hold the power button for 10 seconds to activate the heater function.
  • W
    willielaneAug 13, 2025
    Why is my Duraflame Stove flame working but no heat?
    • J
      James DanielAug 13, 2025
      If the flame effect on your Duraflame Stove is working, but the heater isn't blowing warm air, first, ensure that the heater switch is in the 'ON' position; the switch should light up. Also, check that the thermostat is turned to the highest setting.
  • T
    Travis MaldonadoAug 19, 2025
    How to fix Duraflame Stove with switches light up but no flame?
    • T
      Troy Warner MDAug 19, 2025
      If the switches on your Duraflame Stove light up, but there is no flame effect, the cause may be a broken or loose bulb. You should remove the back panel and check for any broken or loose light bulbs.
  • M
    Mr. Tyler SmithAug 27, 2025
    What to do if Duraflame Stove logs glow but the flame effect doesn't work?
    • S
      Stephen CarterAug 27, 2025
      If the logs glow but the flame effect on your Duraflame Stove isn't working, it could be due to a couple of reasons. First, check if the spinner has fallen from its bracket. Remove the back panel and ensure the spinner is correctly mounted to the motor. If the spinner is correctly mounted, check to see if the spinning motor is functioning. If not, call customer service.
  • N
    Nicole ClarkSep 1, 2025
    Why Duraflame Stove has no power?
    • H
      harriscrystalSep 1, 2025
      If your Duraflame Stove has no power and the switches do not light up, ensure that the power cord is plugged into a standard 120-v outlet.

Summary

Consumer Safety Information

Important Instructions

Product Specifications

Package Contents

Preparation and Assembly Steps

Mounting Legs to Stove Body

Instructions for attaching the stove legs to the base using screws.

Mounting Door Pull to Stove Body

Steps to install the door handle onto the fireplace door with a bolt and washer.

Installation Guidelines

Stove Location

Guidance on selecting a suitable placement for the electric stove.

Electrical Connection

Requirements for connecting the electric stove to a power source.

Operating Instructions

Replacing Remote Control Batteries

Disposal of Used Batteries

Care and Maintenance

Clearance to Combustibles

Ensuring safe distance between the heater and flammable materials.

Cleaning Trim

Instructions for cleaning the metal trim of the stove.

Replacing Light Bulbs

Procedure for replacing the internal light bulbs.

Maintenance of Motors

Troubleshooting

1-Year Limited Warranty

Replacement Parts List

Duraflame DFS-750-6 Specifications

General IconGeneral
BrandDuraflame
ModelDFS-750-6
CategoryStove
LanguageEnglish

Related product manuals