Thank you again for purchasing the Durafly Excalibur,
we know you’ll enjoy it immensely.
Don’t forget, spare parts are available for this model,
please see opposite for details.
13
* Do not leave your model in direct sunlight for prolonged periods of time. This will have an
adverse effect on the foam surface of the model.
* Set ‘Break On’ on the ESC if it is not done so already out of the box. The prop will not fold if the
brake is not set to ‘On’. To set the brake ‘on’ use the Durafly or Aerostar programming card (see
spare parts listing) or follow the below instructions:
To Next Page
Loading...
