GLOSTER GLADIATOR MK1
DURAFLY 1100MM PLUG AND FLY
32. Do a final check that everything is square,
and that both wings line up with each other.
33. Double check that when your aileron stick
and the trim is at neutral that all the ailerons are
at neutral.
36. Using a contact adhesive, glue the 2
fuselage machine guns into place as shown.
37. Using a contact adhesive, glue the 2 wing
machine guns into place as shown.
34. Do the same with the elevator to ensure it
is neutral.
35. Do the same with the rudder to ensure it is
neutral.
9
To Next Page
Loading...
